Since 1917
Fixing a Squeaky Wood Floor from Above
   

1. Drill hole, to prevent wood from cracking, at an angle.

 

2. Hammer in cement coated flooring nails or ring-shank nails.
3. Countersink nail 1/8 inch under surface.3 Countersink nail 1/8 inch under surface. 4. Cover holes with wood putty. Let dry, and sand flush
Other Floor Covering Articles:

Fixing a Squeaky Wood Floor from Below

Refinishing Wood Flooring

Removing Scratches from Wood Floors

Replacing a Damaged Area of Carpet

Replacing Damaged Vinyl Tile Flooring

Replacing a Section of Wood Floor

The Three Techniques of Sanding Wood Flooring

About Ceramic & Stone Floor Tile


Other Resources:

All How-To Tips & Guides

Other Project Resources

Browse Floor Covering Products featured on Sutherlands.com

Sutherlands® Credit

Sutherlands® provides these project tips and guides as a service to our visitors. Due to possible variance in conditions, equipment, materials and individual skill levels, Sutherlands® assumes no responsibility for losses or injuries incurred during maintenance or repair of your property. Sutherlands® assumes no liability for errors or omissions in the Resources section of this website. Please read and follow any safety precautions provided by tool and equipment manufacturers, and consult a building professional in your area if you have any questions about a repair project. Always check your local codes before building, and obtain the required building permits.