- Some stock photographs may show options that are not included. Please check product description.
1-Gallon Satin Sand Rust-Oleum Concrete And Garage Paint Plus Primer
- Mfg.#
- 347121
- Sku#
- 902783
- Use on indoor/outdoor horizontal masonry concrete surfaces including carports, garages, driveways, walkways, porches, patios, basements and more
- Advanced water based acrylic formula that is low odor and provides easy soap and water clean-up
- Protects surfaces from damage from hot tires, motor oil, grease and gasoline
- Use a synthetic 3/8" nap roller cover on a 9" roller frame to apply
- When using two or more cans of paint, inter-mix them in a separate bucket to ensure color uniformity
* Estimated stock levels as of Sat, Apr 11, 2026. All items subject to prior sale. Prices may vary between stores and online. Please call ahead to confirm availability of items marked as Limited Stock.
Description
Rust-Oleum Satin Concrete Floor Paint adds color to garages, driveways, patios, walkways, basements, pool decks, carports and shop floors. Apply for protection from UV and weather wear, as well as hot tires and chemicals. Self-primes with 1-part epoxy acrylic technology.
Read all information and instructions provided on product's instructions and label, including all cautions, before use.
Specifications
General
| Application | Use a brush or edger to trim the perimeter and hard-to-reach areas. Use a long handled extension pole and a high quality 3/8 inch nap roller cover to apply an even coat of Rust-Oleum Concrete Garage and Floor Paint and Primer onto the surface. Apply in 4 ft x 4 ft sections and maintain a wet edge to prevent lap marks and gloss differences. Continue applying in 4 ft x 4 ft sections until complete. Only one coat is necessary. If a second coat is desired, wait 24 hours before applying the second coat in a direction perpendicular to the first. Occasional touch-up may be necessary for areas subject to heavy vehicle traffic. Rust-Oleum Decorative Color Chips (sold separately) can be added for an upgraded appearance. Chips should be applied in 4 ft x 4 ft sections while the coating is wet. |
|---|---|
| Color | Sand |
| Color Family | Brown / Beige / Tan |
| Coverage | Each gallon contains enough material to cover approximately 300-400 square feet over smooth, bare concrete. Very rough or porous surfaces will require more material. |
| Dry Time | Surfaces should be ready for light foot traffic in 12-16 hours and normal foot traffic in 24 hours. FOR FULL CURE AND VEHICLE TRAFFIC, ALLOW 5 DAYS. Dry times increase at cooler temperatures. |
| Finish | Satin |
| Indoor/Outdoor | Indoor/Outdoor |
| Type | Concrete Floor Paint |
Dimensions
| Size | 1 gal |
|---|
Manufacturing Details
The following information is subject to change without notice
| Prop 65 Warning |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
|
|---|---|
| Shop USA | Yes |
Videos
Related Documents
Brochure (PDF)
Msds (PDF)
