1/2-Pint Pre-Stain Wood Conditioner
- Mfg.#
- 134074444
- Sku#
- 7054042
Please select a store to view pricing and availability.
* Estimated stock levels as of Fri, Apr 26, 2024. All items subject to prior sale. Prices may vary between stores and online. Please call ahead to confirm availability of items marked as Limited Stock.
- Penetrates the pores of the wood, reducing the amount of stain the larger pores will absorb
- Evens out the absorption of stain, preventing streaking and blotching
- Quickly dries in 15 minutes to minimize project time
- A companion product to Minwax Wood Finish
Description
Minwax Pre-Stain Wood Conditioner prepares bare wood for staining. It penetrates the grain of the wood to promote uniform acceptance of oil-based stains.
Treating the surface with Pre-Stain Wood Conditioner helps prevent streaks and blotches by evening out the absorption of oil-based stains.
It can be applied over any wood but is especially necessary when working with soft or porous woods like pine, alder, birch, and maple.
Read all information and instructions provided on product's instructions and label, including all cautions, before use.
Read all information and instructions provided on product's instructions and label, including all cautions, before use.
Specifications
General
Applicable Materials | Wood, especially soft woods like Pine, Spruce, & Fir |
---|---|
Application Method | Brush, cloth |
Base Type | Oil-based |
Boiling point | 298.4- degree F |
Clean Up | Mineral spirits or paint thinner, following manufacturers safety instructions. |
Color | Clear |
Color Family | Clear |
Compositions | Light Aliphatic Hydrocarbon, Med. Aliphatic Hydrocarbon Solvent |
Container Type | Can |
Coverage Area | 125 sq. ft. per quart |
Density | (Relative Density) 0.79 |
Dry Time | 15 min |
Evaporation Rate | 0.13 (butyl acetate = 1) |
Finish | Clear |
Flammability Rating | 2 |
Flash Point | 100.4-degree F |
For Use With | Clean, raw wood before using oil-based wood stains |
Form | Liquid |
Indoor/Outdoor | Indoor |
Lower and Upper Explosive (Flammable) Limits | Lower: 1%, Upper: 6% |
Net Content | 0.5 Pt |
Number of Coats | Normally 1, but additional coats may be applied on highly absorbent woods |
Odor/Scent | Mild Hydrocarbon |
Specific Gravity | 0.79 |
Type | Pre-stain wood conditioner |
Usage | Use on soft or hard woods before using oil- based wood stains |
VOC Content | 708 g/L |
Vapor Density | 5 [Air = 1] |
Vehicle Type | Hydrocarbon Resin, Modified Linseed Oil |
Viscosity | Kinematic (40C (104F)): <0.205 cm2 /s (<20.5 cSt) |
Dimensions
Height | 3.10 in |
---|---|
Length | 2.86 in |
Size | 1/2 Pt |
Weight | 0.66 Lbs |
Width | 2.86 in |
Manufacturing Details
The following information is subject to change without notice
Country of Origin | US |
---|---|
Prop 65 Warning | WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. |
Shop USA | Yes |
Label Information
Certification, Codes, Standards | Conforms to ASTM D-4236 |
---|
Related Documents
Msds (PDF)
PLEASE NOTE: Product information for this item was provided by a third-party source and has not been verified. Please use our feedback button to report any errors. Read our Terms of Use.