"Mom! I don't have enough room for my new shoes!" Has this ever happened to you? Our team embarked on a mission to create a solution that can fit all shoe sizes. We offer a quick DIY project that takes less than four hours to complete! The best part is that you can customize it to fit the dimensions of your space.
Things you will need:
- 1x12-12 white wood appearance
- Miter saw
- Drill
- 1-3/4" screws (12)
- Tape measure
- Clamps
- Wood glue
- Framing square
- Angle finder
- Paint or stain
We are making a 3-shelf shoe rack from a 12 ft board. Sutherlands helped us cut them in half for easy transport. For shelves, we cut the (3) 2’ boards for the shelves and (2) 3’ boards for the sides.
To create the shelf threads, utilize the angle finder to decide how far you want them to protrude from the wall. We chose a 20-degree degree (see the result on the right).
Adjust your miter saw to a 20-degree angle. Secure both boards in place with clamps before cutting each end, as shown in the image above.
The next step is to decide the spacing between each step. Take into account the size and height of the shoes, such as boots and high heels.
To accurately mark 20-degree lines, utilize an angle ruler and/or a framing square to indicate the spot prior to gluing and nailing.
\
We opted to secure the board using screws, but wood glue can also be used on its own. Predrill two holes for each board. Apply glue and position each board upright. Insert the screws into the predrilled holes as demonstrated. (If you decide to use only glue, make sure to clamp each section and allow it to dry overnight.)
 |
We applied a subtle layer of natural stain, but feel free to paint it as well! This design is ideal for areas with limited space. You can create shelves that are less deep; ours measure 12 inches in depth. If you're crafting this for a children's room, you can definitely make it more compact and narrower. |
