Installing Recessed Lighting

Remove all insulation. Place fixture between joist and trace outline of canister.
Cut out hole. Score first if ceiling is plaster.

Insert lip of frame into hole from above. Nail frame into joists

Insert armored cable from canister into electrical box. Run cable from wall into box. Strip and connect wires with connector. Replace insulation.

Attach canister to frame. Install in bulb reflector and ceiling trim. Install bulb.
Sutherlands® provides these project tips and guides as a service to our visitors. Due to possible variance in conditions, equipment, materials and individual skill levels, Sutherlands® assumes no responsibility for losses or injuries incurred during maintenance or repair of your property. Sutherlands® assumes no liability for errors or omissions in the Resources section of this website. Please read and follow any safety precautions provided by tool and equipment manufacturers, and consult a building professional in your area if you have any questions about a repair project. Always check your local codes before building, and obtain the required building permits.