Since 1917
Fixing Loose Ballusters & Rails
Make a pilot hole through the baluster into the rail. Countersink a wood screw in the hole.
Glue joint and hammer nails through the railing's side
Other Millwork & Paneling Articles:

Repairing a Creaking Stairway from Above

Repairing a Creaking Stairway from Below


Other Resources:

All How-To Tips & Guides

Other Project Resources

Browse Millwork & Paneling Products featured on Sutherlands.com

Sutherlands® Credit

Sutherlands® provides these project tips and guides as a service to our visitors. Due to possible variance in conditions, equipment, materials and individual skill levels, Sutherlands® assumes no responsibility for losses or injuries incurred during maintenance or repair of your property. Sutherlands® assumes no liability for errors or omissions in the Resources section of this website. Please read and follow any safety precautions provided by tool and equipment manufacturers, and consult a building professional in your area if you have any questions about a repair project. Always check your local codes before building, and obtain the required building permits.